MINI PIN MILLS Supplier as a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from a few tens of grams of trace experiments to produce hundreds A few tons of large production, Mini Pin Mills Supplier with a narrow range of particle size distribution, average particle size; good powder shape, high purity; suitable for low melting point, thermal drugs; good sealable, less pollution; Crushing - Mixed - Dry Online Operation and other major characteristics have been widely recognized by the company.
A mini Pin Mills Supplier cost is very high. If you want to use MINI PIN Mills Supplier for a long time, please pay attention to the following:
In the production process, you should check The temperature rise of the bearing, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the drive belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size after wear is thick, and immediately replace it after wear.
5. 5.Mini PIN MILLS SUPPLIER Host and level distribution bearings are lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if not fully filled, the bearing temperature It will be too high.
7. The replacement period of the helical feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a 7 point introduction to the daily maintenance of MINI PIN Mills Supplier.
El Pie Modified Quartz, Silicon Flour MINI PIN MILLS SUPPLIER Case Sharing:
A Material Company is a series of products that specialize in inorganic non-metal powder materials and surface treatment. High-tech enterprises in R \u0026 D, production, sales and technology services.
The company has a series of automated production equipment and testing instruments such as fine-grinding, precision grading, and surface covering to compound mixing; high purification, ultrafine, sphericalization, and Its surface cover treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45UM
Hours Yield: 3-10kg
The superfine grade machine produced by Erfa, the sequential classifier, etc. Multiple particle size products can be produced simultaneously. Welcome new and old customers to come to consult!
