Hierarchical Cell Mill Pulverizer Machine as a crushing main equipment, the role is also growing, in the industrial sector of metallurgy, mine, chemical, cement, requires a large number of raw materials and reuse waste every year. Processing is performed with a classifier. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size of the next job requirements. In the chemical, power sector, the hierarchy, the raw material is broken, grind, and increases the surface area of \u200b\u200bthe material, has created favorable conditions to shorten the chemical reaction of the material.
Many manufacturers who want to smash the machining process will choose to buy a hierarchical cell mill pulverizer machine, but not all the crushers can apply production and processing, the wrong processing method will make the pulverizer wear speed becomes fast . The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large.
The device operates for a long time in a higher pulverized pressure, which requires uniformity of cyclical replacement loss.
The products after the crushing are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.
Elphenol resin Hierarchical Cell Mill Pulverizer Machine Case Sharing: The company has a manufacturer of phenolic resin in its customers, and the company has found a lot of powder equipment companies without suitable equipment. Finally, we found our El Pie, after the experiment, our company's product hierarchical cell mill pulverizer machine.
Technical parameters:
Finished particle size: D50 less than 5μm
Production capacity: greater than 50kg / h
Our company produces Hierarchical Cell Mill Pulverizer Machine not only from ordinary powder 20-2 μm in detail, and can be used directly with the mechanical pulverization equipment, forming a closed circuit, improving the pulverization efficiency, and avoiding the production of high temperatures in the cavity to cause adhesion, glue, causing the operation, while The grading machine has also received a well-praised by the majority of users, and friends who need it are in touch with us!
