DISC Jet Mill OF TITANIUM OXIDE is a crushing device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.
DISC Jet Mill OF TITANIUM OXIDE Features:
Suitable for other models significantly reduced investment and use cost, suitable for low value of coarse powder;
2, energy consumption Low, low noise; simple structure, less lossless parts, simple and fast maintenance;
3, low speed large diameter single-class wheel, large production capacity; inner wall wear protection;
4 , Automated operation, intelligent instrument monitoring, low labor cost and labor intensity;
5, negative pressure running free dust leaked; achieve environmental protection and labor safety requirements;
6 The uniformity and consistency of the product is good.
The above is to introduce the working principle and characteristics of Disc Jet Mill of Titanium Oxide, the grading granularity of Disc Jet Mill of Titanium Oxide is concentrated, and the customers' love is received. Welcome to inquire!
1, structure reasonable, stable operation, small energy consumption, large crushing capacity, small size, no fault, cleaning Easy to maintain.
2, the outer casing uses water cooling and its own air volume delivery crushing material, increase the temperature, and pulverizing the thermal material.
3, the wear of the blade is generated by a large amount of ultrasonic eddy current generated by the back of the blade and the vibration of the high frequency pressure.
4, the structure is compact, there is no dust overflow problem.
DISC JET MILL OF TITANIUM OXIDE Job Safety Application Basic Requirements
1 The line is not allowed to use iron and sticks instead of hair.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.
ALPA Composite Powder Disc Jet Mill of Titanium Oxide Case Sharing: This customer is a cement manufacturer, wants to deliver the cement filler composite powder, select the composite powder of the appropriate particle size section, Thereby to improve the performance of the cement. Investigate the domestic powder equipment manufacturer, and finally chose our AlPA classifier to achieve the pursuit of large capacity, and ensure the particle size of the powder.
Case parameters:
Powder particle size: D50: 6.8μm
For powder production companies, customized production, non-standard customized products are an advantage . The demand for each company is different. Therefore, the non-standard custom of powder equipment has gave birth to the powder equipment, and the ALPA of Shandong is a powder equipment non-standard custom enterprise. Our crushing equipment customized for Taiwan companies is a good case. Enterprises that have powder equipment customization needs to contact us.
Today, I will introduce you to here. If you want to know more, please continue to pay attention to our website.
