Fluidized Bed Jet Mill of Wormwood is a crushed device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.
Fluidized Bed Jet Mill of Wormwood:
Using the high pressure airflow with the animal, it is self-smashing, ensuring the purity of the material, facing the high hardness of higher materials, can use high hardness ceramic corundum as a The pulverization cavity is greatly reduced to reduce the wear of the pulverizer to ensure that the purity of the material is low-temperature, or the inert gas is pulverized, such as nitrogen, carbon dioxide, is suitable for high activity, flammable and explosive non-metallic mine powder.
High capacity, fast efficiency; compared to other ultra-fine pulverizations of the same capacity, because Fluidized Bed Jet Mill of Wormwood continuous feed, continuously pulverized, continuous recovery, the characteristics of continuously increased significantly And with the mode of automation control, it is much higher than other devices.
The structure is simple, the disassembly and cleaning is convenient, there is no need to lubricate oil, etc.
The product is fine, and the particle size distribution is uniform. Because the grading effect of Fluidized Bed Jet Mill of Wormwood makes it produced by ultrafine powder fineness and distribution, and then with Fluidized Bed Jet Mill Of Wormwood is more likely to make the product particle size and distribution far better than the processing of other equipment.
1. Open the switch in the control cabinet, start the power supply, equipment operation;
2, the raw material enters the feeder
3, the raw material enters the feeder injector in the feeder
4, the raw material reaches the hierarchical body after special dispersion, grading through physical effects such as airflow and gravity;
5, the airflow of the three flow paths has the control valve group adjustment to maintain their respective balance;
6, grading The rear coarse fine product is recovered separately;
7, clean air is discharged into the atmosphere.
1. During the production process, the airflow baffle should be checked regularly. When the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.
4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.
A mining company specializes in the development and production of stone-shaped sand, silicon powder,
company produces various models, each Quartz sand and water-washing dry stone sands in quality indicators are widely used in: glass and glass products, metallurgical manufacturing, cast steel, precision casting, furnace materials, refractory materials, ceramic glaze, ceramic billets, rubber, coating and other industries, welcome To find, guide, negotiate business!
Case parameters:
Product particle size: D100: 11.5UM
Horses Yield: 380kg
