Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.
Air Classifier Mill for Florfenicol Ultrafine pulverized depolymerization of materials, the material after extracting the disposal, the properties of the powder will change, and it appears high viscosity after the impact is high. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design. Shan dong alpa design-developed material smashed hit in the crushing of materials.
Air Classifier Mill for Florfenicol Compressed Gases Transmits material particles in the bucket into the disc shocking chamber 3 by the high-speed jet produced by the feed nozzles, and there are several jet nozzles around the crushing chamber. The high-speed fluid is injected in the direction, producing an ultra-high-speed swirling in the pulverizing chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized. When the particles are pulverized to the fractional particle size below the fractional particle size, the centrifugal force of the particle movement is reduced, and the grading swirling is separated from the center outlet under action, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact. Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles has not been fully utilized, so the production energy consumption is still high.
The working principle of Air Classifier Mill for Florfenicol is a complete crushing system composed of crushers and cyclone separators, dust collectors and air blowers. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the classified area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the graded cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh, especially for high hardness, high purity, high value-added crushing materials. It includes a vertical hierarchy device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. It is especially suitable for thermal sensitivity, low melting point, sugar-containing and volatile substances. The grinding process is mainly dependent on the collision of the material itself, and is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment is high, and the product is purity. [123
1, check whether the lubrication of the bearing is good
2, check if all fasteners of the pulverizer are fastened. 3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.
AlPa Phosphate AIR Classifier Mill for Florfenicol Case Sharing: The customer's main business is the production and sales of special powder for rust-proof pigments and diamond tools industry. The raw material production and processing, new products are developed in one, with a production and sales enterprise of phosphate, such as mining, smelting, powder, and new materials.
The customer needs to perform airflow grading to the iron phosphate ultrafine powder, eventually experimenting with our company's grading function to meet the customer needs.
Hours Yield: 80kg / h
The equipment market is a rapidly changed, the current airflow classifier has certain demand in the market, but the society is constantly evolving, No matter what industry needs to keep pace with the times, you can lead the industry.
