Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder grinding materials, Steam Jet Mill for Silicon Anode is the most effective in achieving ultrafine powder grinding of powder. One of the equipment. In China, after 20 years of development, Steam Jet Mill for Silicon Anode industry has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.
Steam Jet Mill for Silicon Anode technology is designed and manufactured in the center of grading.
There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.
The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.
Steam Jet Mill for Silicon Anode is designed and developed using a mixed powder spraying principle. Suitable for pharmaceutical, food, chemical and other industries. It is widely used. Cold source forms a closed circuit circulation system, which takes advantage of energy and energy conservation: Wenjing pulverized can drop to zero down 196 degrees, depending on the brittle temperature of the material, the temperature can be controlled by the pulverization process, select the best grinding temperature, reduce the pulverization fine The degree can reach 10-700 energy consumption, and even reach micron wood fineness.
Ultrafa Steam Jet Mill for Silicon Anode's correct usage:
1, the ultrafine pulverizer and power unit should be securely installed. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane. 2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3, before the pulverizer starts, first turn the rotor, check if the jug, hammer and rotor are flexible and reliable,Collision phenomenon, whether the rotation direction of the rotor is consistent with the direction of the arrow, whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
ALPA Trimethium Silicate STEAM JET MILL for Silicon Anode Case Sharing:
Case parameters:
Product particle size: D50: 3-25UM
Hours Yield: 3-10kg
Shandong Alpa is a source manufacturer specializing in Steam Jet Mill for Silicon Anode, all year round Domestic and foreign customers provide equipment, welcome to inquire!
