The people currently used in daily life are also more, the airflow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is constructed, usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.
DISC Jet Mill OF SOIL is carried out from the following aspects:
1. Strengthen basic theoretical research, optimize process flow
Strengthen basic theory research to guide Self-innovation and development of equipment, based on existing equipment, vigorously develop process optimization research and optimize process flow. For mass-produced powders, special models can be developed.
2. Improve stand-alone production, reduce unit product energy consumption
With the increasing demand for ultrafine powder products, especially large-scale dosage users increase and product quality The continuous increase in stability requirements has continued to rise for large equipment market demand. Large-scale equipment can more effectively adapt to the development trend of ultrafine powder processing and gradually expand the scale, and there is also many advantages in the energy consumption of unit products, excellent product quality and convenient management.
3. Improve product fineness, enhance the device pulverization limit
The ultrafine powder processing equipment and technical demand for particle diameter at 1 μm or less is getting stronger. Ultrafine powder will be a very important development trend in the field of ultrafine powder in the future. This is mainly due to the current large amount of high-tech and the development and production of new materials. For example, in terms of environmentally friendly building materials, the development of biomedicine materials, etc..
4. Online regulation of product fineness and particle size distribution
This development is a prerequisite requirement for ultrafine crushing lines to achieve intelligent control. Strengthen automatic control and online testing equipment and related software developments and related software in order to improve the level of equipment and reduce energy consumption.
What are the features of DISC Jet Mill OF SOIL? Ultrafine airflow classifier, particularly suitable for brittle materials, the hardness of the material is suitable in Mogie 1-3, such as graphite, kaolin, quartz and other non-metallic minerals. Due to the high speed of the microcomputer, the intake is large, it is used to grind heat sensitive materials, synthetic resins, sulfur, pesticides, food, Chinese herbal medicine, phosphoric acid, magnesium carbonate and other items.
Do you know how does DISC JET MILL OF SOIL correctly? I hope the content below can help you.
1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance
(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions
(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA calcium carbonate is shared by DISC Jet Mill of Soil: The customer is a stone powder company, mainly engaged in producing calcium carbonate, magnesium oxide and other companies, which requires calcium carbonate ultrafi powder Selection, grade the product of the required granular segment. After the experiment, as well as the production requirements, our AlPA's host can reach the company's needs, and finally purchased a plurality of graded units of our company.
Welcomes the major calcium carbonate flour manufacturers with powder grading to factory to visit and incurred.
The DISC JET MILL of Soil produced by our company can not only distribute 20-2μm from the ordinary powder, but also directly with mechanical pulverization equipment, forming closed circuits, improving pulverization efficiency. And can avoid high temperatures in the cavity to cause adhesion, glue, causing itThe homework cannot be carried out, and the grading machine has also received a good review of the majority of users, and the friends who need it will contact us!
