The people currently used in daily life are also more, Steam Jet Mill For Sand is smashed into standard size, usually smashed into micron levels, usually our equipment is With multiple devices, it is usually composed of coarse, fine powder, or a wind device or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.
The main application of Steam Jet Mill for Sand determines its extensive application range and finished product. Typical materials are: super hard diamond, silicon carbide, metal powder, etc. High purity requirements: ceramic color, medicine, biochemistry, etc., low temperature requirements: medicine, PVC. By changing the normal air of the gas source into an inert gas such as nitrogen and carbon dioxide gas, it can be used as an inert gas protection device. Suitable for crushing grading treatment of flammable explosive and oxidative materials.
Characteristics of Steam Jet Mill for Sand 1. Suitable for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
1. Prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, whether it works fine.
Second, open
1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter-feeder-main valve-compressor-step impeller motor-cyclone discharge, dust removalOff - Fan - Total Power - Air Compressor.
4, repair
1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note
1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
ALPA Paint Slag Steam Jet Mill for Sand Case Sharing: This customer is a crusher who can smash the paint slag. Finally, I know that our Shandong Alpa is a non-standard custom-made enterprise that is a super-smashing equipment, and I have found us. We have repeatedly tried, and we found a super-pulverizing machine suitable for crushing paint slabs. Finally, the customer purchased our company Steam Jet Mill for Sand, which is the most crushed oil paint slag.
Technical parameters:
finished particle size: D90: 800 目
Production capacity: 800-1000kg
Shandong AlPa is a company with research and development of gas flow crusher in 200 years After years of deposition and accumulation, experience is rich, with a number of patented technologies. In the years, the airflow mill has been provided for domestic and foreign customers, there will be tens of thousands of equipment, often have a customer to order our products again, enough to explain the reputation of the Shandong AlPa airflow mill. Welcome to inquire!
