Air Classifier Mill for ChalCopyrite

Air Classifier Mill for ChalCopyRite can be used for important or need to be grounded to granular product processing, the ALPA ultrafine pulverizer product is good, affordable, factory direct sales, also push after-sales maintenance service for customers, service attitude

[ 123] High-temperature Air Classifier Mill for ChalcopyRite Performance:

1
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.

The working principle of Air Classifier Mill for ChalcopyRite is composed of a classifier, a cyclone separator, a dust collector, and a veneer. Under the pulverizing fan puller, the lower end of the gas pulverizer is moved upward to the hierarchical region, and the thickness and fine product are separated from the strong center of effort to the high-speed rotation grade turbine. The cyclonic separator or dust collector is collected by the grading wheel, and fine particles required to meet the particle size are collected, and the coarse particles are collected. The velocity of the entrained fine particles disappears and falls along the two towers of the cylinder wall. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles drops to the discharge port.

Any mechanical equipment, there must be a certain precaution before use, must check the precautions to operate, so that the damage rate is minimized, so what AIR Classifier Mill for ChalcopyRite is in use Precaution?

1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.

2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked.

AlPa Quartz Powder Air Classifier Mill for ChalcopyRite Sample Sharing:

A mining company specializes in the development and production of stone-shaped sand, silicon fine powder,

company produces various models, various quality indicators Quartz sand and water washing dry stone sand is widely used in: glass and glass products, metallurgical manufacturing, cast steel, precision castCrafts, furnace materials, refractory materials, ceramic glaze, ceramic billets, rubber, coating and other industries, welcome to find, guide, negotiate business!
Case parameters:
Product particle size: D100: 11.5UM
Hour Yield: 380kg

AlPA Technology recommends that you should pay attention to the performance of the equipment during the use of ultrafine airflow classifiers, jet grading machines, powder classifiers, must pay attention to regular inspection equipment performance and prevent malfunctions during use.