Environmentally-friendly Air Classifier Mill for MICA Powder has gradually become the market leading to mechanical equipment, and modern new mechanical equipment in the machinery processing and manufacturing industry in the stage has gradually replaced traditional rough mechanical processing and production. Production has become a new leading leading to the implementation of technological innovation upgrades at this stage.
What factors affect the performance parameters used by Air Classifier Mill for MiCA Powder?
The following is a detailed description:
1. Feed granularity control
Most AIR Classifier Mill for MICA Powder has a certain upper limit requirement for feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium
At present, the working medium of Air Classifier Mill for MiCa Powder is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed
Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit
AIR Classifier Mill for MICA Powder In the pulverization process, as the material particle size is reduced, the crystallization and intensity of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material ratioThe area increases, and the surface activity of particles is increased, and the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is extended, it is difficult to further reduce the particle size of the material.
Characteristics of Air Classifier Mill for MICA Powder
1. Suitable for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
In the production of AIR Classifier Mill for MiCA Powder, there will be a large amount of dust, if there is a lot of dust, it will have a certain impact on the environment, what should we deal with? [ 123] Next, several methods:
1. Install the dust collector: Generally, this dust collector can now be used with a powder classifier. It puts dust income trapping bag, dust is filtered by the dust box;
2, cloth bag dustproof: cloth bag is tightly in the mouth of the machine to prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
ALPA Pigment AIR Classifier Mill for MICA Powder case Share: This customer needs to use the pigment ultrafine pulverized equipment during its production. Through the ultrafine pulverization of the pigment, improve the quality of the product. After many other than the same type of equipment, we finally selected our AIR Classifier Mill for MiCa Powder. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.
Technical parameters:
finished particle size: D90: 13μm;
Production capacity: 130kg / h
Shan dong alpa is committed to Air Classifier Mill for MICA Powder, has mature Process, company technical strength, professional engraving development, survive by quality, welcome everyone to come to consult.
