In this economically booming area, there are many people who know the airflow pulverizer, Steam Jet Mill for Silicon Monoxide technology is in a leading position in the same industry.
Steam Jet Mill for Silicon Monoxide should be installed in a place where the site is flat. Pick the processed material before work, no metal, stone, etc. hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed. When working, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately. When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.Steam Jet Mill for Silicon Monoxide, also called the ultra-speed pulverizer, before the invention, the principle of the device is to use the compressed air by the feed injector, with the pulverization, multiple high-speed flow drive jets All methods of friction the nozzle of the wall of the crushing effect, control the milling damage by adjusting the depth of the grinding of the grinding, vertically or adjusting the feed speed.
Steam Jet Mill for Silicon Monoxide has many core attachments, and these attachments are also fragile parts. Once they don't pay attention to repairs, it will cause serious consequences, especially if the airflow grinding spindle will cause downtime, and cannot be estimated. Loss, the following sections describe the reasons for the fracture of the airflow grinding main axis.The cause of the airflow grinding main shaft is easy to damage:
1. Since the pulverizer is a long-time crushing and ground bulk ore, the mechanical impact will cause fatigue damage to the spindle, if it is operated, the surface of the spindle Will wear, if you don't pay attention, cracks are generated. 2. The air supply will pass the airflower overload. When gas flow is used, you need to feed it properly, and each machine is limited. If this is exceeded, the component is easily damaged in the load operation, which will affect the overall service life of the airflow.
3. During mining and transportation, ore is often mixed with some waste metals. When these objects are in electromagnets at the upper portion of the belt, the electromagnet cannot be Excluding, causing these materials in ore and mud into gas flow, resulting in frequent iron, resulting in frequent impact on the spindle and other portions.
The above is Steam Jet Mill for SiThe reason for the Licon Monoxide spindle is easily damaged.
ALPA desulfurizer Steam Jet Mill for Silicon Monoxide case share: The company is a high-tech company that requires a desulfurizer crushing machine, investigating a number of powder equipment manufacturers at home and abroad, finally selectedOur AlPa Steam Jet Mill for Silicon Monoxide.
Technical parameters:
Production capacity: 4-5T
AlPa Technology recommends that you are using ultrafine airflow classifiers, jet classifiersWhen equipment such as powder grading machine must pay attention to regular inspection of the performance of the device and prevent malfunction during use.
