With the development of society and life, the industry's demand for Steam Jet Mill for SimVastatin is getting bigger and higher, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.
Steam Jet Mill for SimVastatin works in work, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
Let's take a look at the Features of Steam Jet Mill for SimVastatin.
1, can effectively reduce cost, reduce cost, suitable for low value of coarse powder.
2, simple structure, convenient maintenance, less easy to lose weight, low operating noise, low energy consumption.
3, the classification machine uses large diameter single-stage classification wheels to improve production capacity.
4, the inner wall smooth and wear, more conducive to the classification of materials.
5, use a negative pressure operation, so that it does not leak, to achieve environmental requirements.
6, running stable and reliable, its product can be uniform.
Any machinery device must pay attention to it before use, pay attention to use, operation, make it damaged by minimize, then what should you pay attention to before using Steam Jet Mill for SimVastatin?
1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.
3, before adding the material to the pulverizer, it is not mixed to avoid damage to the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5. If there is any abnormality in use, it should be treated immediately to avoid more loss.
6, some parts should be checked regularly. If it is damaged, it should be replaced immediately.
ALPA Pigment Steam Jet Mill for SimVastatin Case Sharing: This customer needs to use the pigment ultrafine pulverized equipment during its production. By smashing the supermatch of the pigmentImprove the quality of the product, after more than the same type of equipment, finally chose our AlPa Steam Jet Mill for SimVastatin.Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.
Technical parameters:
finished particle size: D90: 13μm;
Production capacity: 130kg / h
