Air Classifier Mill for baking SODA is mainly suitable for a wide range of applications, high finished products, and is widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, food, Health products, new materials and other industries.
Air Classifier Mill for baking soda temperature increases, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
AIR Classifier Mill for Baking Soda Working Principle: Crusher and Cyclone Separator Drainage Machine Map into a complete crushing system, compressed air is filtered and dried, then through the Raval nozzle in multiple high pressure air Enter the crushing room at high speed. stream. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel are separated from the thickness and fine product to the t-cyclone and dust collector by the grading wheel with the thickness of the granularity. Particles and continue to break in the crush region. High-pressure gases (compressed air, superheated steam or other gases) injected from the broken chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in a mixed airflow. Mutual collision and friction and refine.
The privacy of the service life and quality of Air Classifier Mill for Baking Soda has the following points:
1. Properties of materials.
In general, the pulverizer can accommodate all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the intensity, density, hardness, viscosity, shape and electrical performance of different materials, inevitable The difference in crushing effect is caused, wherein the strength of the material is an important factor, while the material that is too high can also result in a decrease in the life of the gas flow grinding.
2. Use time.
If the crusher is working continuously, it will also affect the service life of gas flow grinding, greatly increasing its failure probability.
A material company is a high-tech enterprise integrating research and development, production, sales and technical services in series of inorganic non-metallic powder materials and surface treatment.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, andIts surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45UM
Hours Yield: 3-10kg
