Steam Jet Mill for Pig Hair is a very common and common pulverizer. It has a wide range of applications involving many industries.
Steam Jet Mill for Pig Hair:
Using high pressure airflow with animal, it is shredded, ensuring the purity of material, facing individual hardness, high materials, can be used as high hardness ceramic corundum as The pulverization cavity is greatly reduced to reduce the wear of the pulverizer to ensure that the purity of the material is low-temperature, or the inert gas is pulverized, such as nitrogen, carbon dioxide, is suitable for high activity, flammable and explosive non-metallic mine powder.
High production capacity, fast efficiency; compared with other ultra-fine pulverizations of the same capacity, because Steam Jet Mill for Pig Hair continuous feed, continuous pulverization, continuously collecting characteristics make it large and increased And with the mode of automation control, it is much higher than other devices.
The structure is simple, the disassembly and cleaning is convenient, there is no need to lubricate oil, etc.
The product is fine, the particle size distribution is uniform, and the grading effect of Steam Jet Mill for Pig Hair has excellent ultrafine powder fineness and distribution, and then cooperate with Steam Jet Mill for. Pig Hair uses more to make the product particle size and distribution far better than the processing of other equipment.
1, is suitable for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.
A Material Company is a research and development of special products engaged in inorganic non-metallic powder materials and surface treatment. High-tech enterprises that serve production, sales and technology services.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, and Its surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45UM
Hour Yield: 3-10kg
