Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of Steam Jet Mill for Brown Corundum technology is a stable development of the STEAM Jet Mill FOR Brown Corundum technology is to develop, highly controllable, high quality.
In the production process of crushing using Steam Jet Mill for Brown Corundum, the ultrasonic air flow generated by the device can constantly collide between materials, and this supersonic airflow can also be used for raw materials. A good impact is produced, and then the material can also achieve a good crushing effect with the inner wall of the equipment.
Steam Jet Mill for Brown Corundum works: The material is uniform by the material, fed into the pulverized port, and cut the various straw into a small section under the action of the fixed knife and rotary knife. Then enter the crushing chamber, under the strong hit of the high-speed hammer, the material is rapidly pulverized, due to the large amount of the wind pressure and the large amount of wind pressure in the built-in fan, the pulverized material falls into the screen. The lower chamber is sent from the wind pressure transfer pipe to the aggregate room.
Steam Jet Mill for Brown Corundum Daily Maintenance
During the production process, the temperature rise of the bearing must be checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to exclude Fault.
2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.
ALPA Corksin Steam Jet Mill for Brown Corundum Case Sharing: The company is a professional manufacturer of active biological extracts. Factory, finally purchased our AlPa Steam Jet Mill for Brown Corundum.
Technical parameters:
Finished granularity: 100 full pass
Production capacity: 120kg
Welcome everyone browsing Shandong AlPa website, company specializing in the production of Steam Jet Mill for Brown Corundum product technologyWith development and service, high-energy technical experts, professional after-sales service team solved the worries of our customers.
