Most of the product production and processing of products in the current stage use Jet Mill of Kelp SLAG to use Jet Mill of Kelp SLAG to perform product, one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment It is also imminent to replace. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.
Jet Mill of Kelp SLAG is an industrial equipment that consists of a ball mill, a vibration mill, and a power is 0.75 kW. With the development of society and the needs of people's lives, the industrial community is getting bigger and bigger, and the requirements for fineness, purity and pass rate are increasing, and the processing rate is very high. Micro-powder equipment is usually extremely expensive and low productivity.Jet Mill of Kelp SLAG Operation Performance: In the cyclone dust collector, the bag dust collector is auxiliary, the host is set in the centrifugal grading device, which can be fine grinding, and has a classification function, the wind is cut, no sieve Or mesh, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to the exhaust valve port, reach the product requirements, and the ultra-fine classifier is widely used in chemical, dyes, paints, pharmaceuticals, food and other industries.
How to maintain ultrafine Jet Mill of Kelp Slag, introduce the following points to everyone:
1, the pulverizer runs around each week, you need to stop, check if the filter dust is blocked, clean the filter dust dust bag. 2, the bearing is marked, and the high temperature butter is added regularly, and the bearing is lubricated and maintained.
3, before the production, the air machine operation, check if there is any abnormal noise under the equipment, every two months, the stop inspection is loose.
4, before each shift is parked, the air machine is loaded, and all the materials of the cavity are all discharged.
ALPA Activated Carbon Jet Mill of Kelp SLAG Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research. Investigate a number of domestic manufacturers, and finally choose to cooperate with our AlPa and purchased a Jet Mill of Kelp SLAG.
Shandong AlPa is a source manufacturer of Jet Mill of Kelp Slag, and will provide equipment for domestic and foreign customers. Welcome to inquire!
