It is well known that this product technology of DISC Jet Mill OF STARCH has received extensive attention from the industry.
DISC Jet Mill OF STARCH is based on particle size, shape, density, non-water, no water washing, complete dry, can obtain a narrower particle size distribution, non-polluting microemented micropowder; Efficient Grading, eliminating wear technology, reliability, no leakage technology, large particle control technology, fine powder extraction technology, complete, stabilized flow field design technology, constant gas-solid concentration is more than design technology, regulate a certain number of product yields;
Small wear, can be highly pure, ultra-narrowly machined ultrafine powder, avoiding the wear of the horizontal grade machine. Under the same material, the service life of the equipment is more than 5 times the ordinary classifier;
High grading accuracy, stable and complete hierarchical flow field, and special sealing measures, reliably prevent leakage of crude particles, vertical Circulation in the turbine grading machine guarantees qualified product particle size;
full-negative pressure, no dust pollution, equipment does not need to do the foundation, convenient for maintenance and maintenance. Online detection can be implemented according to user needs, and automatic automatic unmanned production operations are implemented.
What is the grading principle and process of DISC JET MILL OF STARCH? Below, we share with you.
2, the raw material enters the feeder
3, the raw material enters the feeder injector in the feeder
4, the raw material reaches the hierarchical body after special dispersion, grading through physical effects such as airflow and gravity;
5, the airflow of the three flow paths has the control valve group adjustment to maintain their respective balance;
6, grading The rear coarse fine product is recovered separately;
7, clean air is discharged into the atmosphere.
DISC JET MILL OF STARCH Operation During operation, there is an excessive factor in the operation:
2 equipment When running, the vibration sound generated;
3 turntable or hammer and the drug between the drug;
4 The rubbing of the device rotates the friction occurred.
I know why DISC JET MILL OF STARCH has too much noise, we can find a way to solve:
1 Each of the rotating parts plus lubricant, if the bearing and the axis is misalign, then adjust; bearing wear, then Replace the bearing;
2 The heat generation of the pulverization process also produces noise, which can take the pulverizing chamber water cooling jacket to cool down;
3 in the sprinner, install the muffler;
4Damping the device, such as a damping pad.
If your DISC JET MILL OF STARCH also has a similar problem, you can refer to the above situations and programs.
ALPA Cerium DISC JET MILL OF STARCH case sharing: The customer is a research institute in a well-known university in China, and the cerium oxide is ultrafinely pulverized during the study. The DISC JET MILL of STARCH was purchased.
finished particle size: 200-2000 mesh
Production capacity: 10-30kg
As a crusher, Shandong AlPa has been working to customers Provide greater value, the fineness, production capacity, and installation venues of each project are important information for custom selection, pre-sales service, 24-hour online customer service to answer questions, provide ideal communket production line solutions And accordingly, it provides the factory quotation to increase the escort for the cerium oxide crushing project.
The equipment market is rapidly changing. At present, the airflow classifier has certain needs in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.
