In many crushing methods, Fluidized Bed Jet Mill of Nickel Powder has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular, it is suitable for disinfection of materials such as pulverization drugs.
Fluidized Bed Jet Mill of Nickel Powder is simple, but the function is very powerful, using Fluidized Bed Jet Mill of Nickel Powder usually gets a very good effect. Its design is simple, easy to operate, easy to clean.
Fluidized BED JET MILL OF NICKEL POWDER Working Principles: Uniform material by manual material, feed into the pulverized mouth, under the action of the fixed knife and rotary knife, cut various straw into small segments Then enter the pulverizer, under the strong hit of the hammer placed at high speed, the material is rapidly pulverized, due to the large amount of wind pressure in the centrifugal force and the built-in fan, the pulverized material is filled with the sieved Enter the chamber, sent from the wind pressure transfer pipe to the aggregate room.
Fluidized Bed Jet Mill of Nickel Powder is important, you need to pay attention to the following points: 1, check all the lines, electrical components, etc. of the pulverizer, whether it can work properly. Whether the machine is grounded, so that the housing is powered by electric shock. Whether the machine spindle has a card death, if it should be handled in time. Whether the machine has an abnormal situation during operation, if there is a stop check.
2, check the blade, is tightened, whether the blade gap can reach the specified standard. Before using the pulverizer, check the working room is enough or slidable, if it should be removed in time.
3, after the offset is running, it can begin to start the feed. The pulverizer should stop the feed before stopping. Wait until the machine is completely discharged, it can be stopped.
4, the feed should be uniform, not over, so as not to increase the burden on the machine. The pulverizer cannot be cleaned, maintenance, etc. during operation.
Technical parameters:
Finished granularity: 100-325 目
Production capacity: 500kg
The equipment market is the moment of changing, the current airflow classifier is a certain demand in the market.However, the society is constantly evolving, no matter what industry needs to keep pace with the times, they can lead the industry.
