DISC Jet Mill of ChalcopyRite is a very practical and convenient industrial crushing equipment. Most chemical industry, polymer materials need to be used, and the AlPa crusher is fine, and the particles are delicate, and the price is affordable.
When the DISC Jet Mill OF CHALCOPYRITE screen material, the screen has good uniformity under the air pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the classifier without the need for rotating components. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lower end of the classifier moves upward moves up to the hierarchical area, the strobe, the strongest centrifugal force generated by the high-speed rotation grading turbine. The fine particles that satisfy the particle size requirements are entered into the cyclone separator or dust collector by the gap of the graded wheel blades. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
In the conventional dispersion pulverization process, it is difficult to overcome the phenomenon of heating, viscosity. The machine uses a swirling high-speed rotational movement to produce a strong airflow in the mill. The material enters the crushing room under the negative pressure of the feed port. The vortex vibration generated by the strong gas flow between the blade and the module is generated by impact, shearing and grinding. The heat of the crushing room is taken away by the airflow, and the heat generated during the crushing process does not accumulate. The finished powder from the screen stream, improves the weight of the mill can be adjusted by the screen production efficiency, and the fineness is uniform.
DISC JET MILL of ChalcopyRite should maintain and maintain
1. Before using, check all standard parts for all standard parts to tighten, belts are not tightened.
2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.
3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, be sure toConnect the handle to avoid the accident.
ALPA Sulfite DISC JET MILL of ChalcopyRite Case Sharing: This customer is a Saudi company, you need to grade the potassium sulfate ultra-fine powder, and investigate the international powder equipment company, finally selectedOur AlPA classifier equipment.
The above is the DISC JET MILL of Chalcopyrite, which can be introduced. You can make a brief understanding, you need to purchase eddy current pulverizer, disc air crusher, users of ultrafine crusher products please contact us
