Air Classifier Mill for Zirconium Dioxide plays a vital role in the current industrial production. In major minerals, chemical industry, pharmaceutical industries, food manufacturing industry are widely used. With the continuous development of Air Classifier Mill for Zirconium DioXide, the major industries are particularly medical, and the food industry has proposed the purity of materials during the pulverization process. The new requirement, it is desirable that the powder can be kept clean. In traditional Air Classifier Mill for Zirconium Dioxide, carbon steel, stainless steel is generally used as the lining material of Air Classifier Mill for Zirconium Dioxide.
Air Classifier Mill for Zirconium DioXide has a wide range of smudged granularities, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.
The crushing effect is mainly affected by the following factors:
The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments. When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh. So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
Before you want to know the Air Classifier Mill for Zirconium Dioxide, first come first to understand the basic concepts of the grades.
The broad grade is to divide the particles into different parts of the particle size, density, color, shape, chemical composition and radioactivity. The narrow grading is based on different particle diameter particles in the medium (usually air and water), which produces different motion trajectories, thereby achieving different particle diameter particles.
After understanding the basic concepts of grading, let's learn about the grading principle of the next classifier.
The classifier is a precision airflow classification device that can be divided into 3 products of 3 products in a thicker, medium and fine powder. The raw material powder is continuously supplied to a grading machine without a rotating member in a grading machine without a rotating component by a feed tube that is powered by the compressed air;Through the raw material powder into fine powder, medium powder, and 3 products of coarse powder. Each product is trapped in the subsequent cyclone dust collector and dust collector.
In the production process, we should pay attention to maintenance and maintenance of Air Classifier Mill for Zirconium Dioxide.
1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.
2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time to ensure quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.
6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.
ALPA Long Stone Powder Air Classifier Mill for Zirconium Dioxide Case Sharing: The company is a high-tech industry in a industrial company, integrating mineral resources, mining, deep processing in one, main products have six categories: long stone powder, Series of silicon fine powder, aluminum soil, kaolin and other products. The product is high, the particle size, reasonable particle size distribution, stable quality, widely used in electrician, electronics, silicone rubber, ceramics, precision casting and other industries. Products are exported to many countries and regions in China. The company needs airflow selection to ultrafine long stone powder.
Finally, our classifier can meet customer needs.
Product particle size: D50: 16.7
Shan dong alpa is a world-renowned particle and powder processing system provider. If you want to consult, you can get the answer you want by asking Shandong AlPa. , Provide more than just a price of a device, may alsoThere is a powder technology solution in your industry, welcome to call us.
