Fluidized Bed Jet Mill of Copper Oxide is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is smudged, the granules are delicate, affordable.
Fluidized Bed Jet Mill of Copper Oxide is different from other crushers, which are collisions between particles, airflow impact and shearing, high-speed airflow impact, friction and shear and other components A pulverized pulverizer. It has the following main features:
1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
The main performance characteristics of the airflow pulverizer: 1, it contains vertical classification equipment, product size D97: 8 150 microns adjustable, granular shape, and narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassembled and cleaned, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process. 3. The control system uses program control and easy to operate.
In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. Lubricating oil used in this register, using N32 alkaline high zinc-type high-grade anti-motor oil pressure oil, deceleration machine 401 generally lubricated oil, do not replace it with other machines.After four or five months, new oil should be replaced.
Technical parameters:
Finished particle size: 100-325 目Production capacity: 500kg
Compliance to follow the management of the standard, put the quality in the first production and service policy,Provide products and services to our customers with confidence with the weighing airflow mill.
