Jet Mill for PTFE

Jet Mill for PTFE is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Jet Mill for PTFE Design and manufacturing are core work.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.

JET MILL for PTFE Working Principle: Airflow Crusher and Cyclone Separator Distant Machine Connect a complete pulverization system, compressed air is filtered and dry, then through the Raval nozzle in multiple high pressure air intersection Enter the crushing room at high speed. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classification machine, the fine particles that satisfy the particle size required by the grading wheel with thickness, fine product to collect the fine particles and dust collectors by the grading wheel with the thickness, fine particles of the particle size and the dust collector and dust collectors. And continue to break in the broken area.

High-pressure gas (compressed air, superheated steam or other gas) injected from the pulverization chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber were subjected to tangential shock of the air flow injected from different angles. The solid particles collide with each other and friction in the mixed airflow. Since the temperature generated during the pulverization is small, it is conducive to the low melting point crushing material. When toxic, flammable or radioactive substances are crushed, superheated steam is usually used to prevent outwardly spread.
This is because all materials can be precipitated when steam is condensed. The gas flow pulverizer utilizes the material to achieve huge kinetic energy under the action of the high-speed airflow, causing the high-speed collision and the severe friction between the particles, while the high-speed airflow generates shear effects, thereby achieving the purpose of pulverization.


If you want to make a changing machine exert a big performance during work, how much maintenance is unable to work, what is the maintenance classifier?
1, if cleaning When the classifier is divided, it is necessary to pay attention to the motor should not be stained.And the shaft is also the same.

2, if you want to change the precision classifier, or if you want to repair, you must be in the case of power failure.

3, usually pay attention to lubrication and maintenance of the bearing of the classifier.
4. If the precision classifier works for 1,500 hours, remember to add lubricant.
ALPA Soybean Jet Mill for PTFE Case Sharing: The customer is a company in the Netherlands.The company needs ultrafine pulverization to soybean meal (after oily oil).Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance.Through the incoming experiment, the company chose our company's Jet Mill for PTFE.

ALPA Technology Co., Ltd. developed super fine classifier, precision classifier, etc., can effectively protect the purity and accuracy of grading products, if you need to purchase related equipment, please feel free to contact us..