With the continuous advancement of pulverizer technology, Air Classifier of Single Crystal Ternary has been familiar with people. The most popular crushing equipment is now Air Classifier of Single Crystal TerNary. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.
The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.
AIR Classifier of Single Crystal Ternary Principle: When the compressed gas passes the injection of the injector, the pulverized raw material enters the pulverization room, there are multiple pulverized nozzles, spray supersonic airflow peripheral, make material The high-speed impact of the airflow and the material collide with each other, the grading tube is separated, and the coarse particles are separated. The coarse particle cycle returns to the pulverizing chamber, and the interior closed circuit circulation is pulverized, and finally the distribution of uniform distribution at the discharge port. Miniature powder. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.
AIR Classifier of Single Crystal Ternary Motors
1, check whether the lubrication of the bearing is good
2, check if all fasteners of the pulverizer are fastened.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4, check whether the protective device of the crusher is good, if the protection is foundThe device should be abnormal and should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.
ALPA Crystalline Sulfur AIR Classifier of Single Crystal Ternary Case Sharing: Shenyang needs a device that can make ultrafine pulverized sulfur. Crystalline sulfur is a flammable and explosive raw material, so there is a very high demand of the explosion-proof system of the pulverized apparatus. After many examinations, our company's nitrogen protection AIR Classifier of Single Crystal Ternary met the production needs of the company. Air Classifier of Single Crystal Ternary has an advantage in security, production capacity, energy consumption.
Technical parameters:
Finished granularity: 200-300 目
Production capacity: 1.5T
Shan dong alpa specializes in the production and development of Air Classifier of Single Crystal Ternary product technology And service, welcome to consult. With perfect quality, excellent service, the most affordable price, customers provide the best products and services for customers.
