Most of the product production and processing in the current stage uses Spiral Jet Mill for Iron Ore Powder to use Spiral Jet Mill for Iron Ore Powder to make products, which is one of the very common ways of processing, and the continuous improvement of scientific productivity, grading equipment The technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.
Spiral Jet Mill for Iron Ore Powder is used to crush the item, then the crushing items and tailings will also be discharged in time. When the crusher discharges these crushing items, there will be dust. Phenomenon. How do I solve if the dust is too big?
1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;
2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.
The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.
In the conventional dispersion pulverization process, it is difficult to overcome the phenomenon of heating, viscology. The machine uses a swirling high-speed rotational movement to produce a strong airflow in the mill. The material enters the crushing room under the negative pressure of the feed port. The vortex vibration generated by the strong gas flow between the blade and the module is generated by impact, shearing and grinding. The heat of the crushing room is taken away by the airflow, and the heat generated during the crushing process does not accumulate. The finished powder from the screen stream, improves the weight of the mill can be adjusted by the screen production efficiency, and the fineness is uniform.
Spiral Jet Mill for Iron Ore Power Jet Mill for Iron Ore Powder has excessive factors in the operation:
2 When the device is run, the vibration sound is generated;
3 turntable or the friction between the hammer and the drug; 4 The rubbing of the device rotates the friction occurred.
I know why Spiral Jet Mill for Iron Ore Powder has too much noise, we can find a way to solve:
1 Each rotating component adds lubricant, if the bearing and the axis is misalign, adjust; bearing wear ,butReplace the bearing;
2 The heat-generating phenomenon will also generate noise, and can take a reduction in the disintegration of the disintegration of the disintegration;
3 installed the muffler;
4 Such as a damping pad.
If your Spiral Jet Mill for Iron Ore Powder has similar problems, you can refer to the above situations and programs.
ALPA carbonate SPIRAL JET MILL FOR IRON ORE POWDER case sharing: This customer is a company, selling lithium carbonate, lithium hydroxide, potassium sulfate, hydrazine salt, selling carbonated in it During the lithium, it is found that the current customer needs is ultrafite powder of lithium carbonate, so it is upgraded to the production line of lithium carbonate, purchasing many of our Alpa's multiple spiral Jet Mill for Iron Ore Powder.
Technical parameters:
Production capacity: 450kg
The equipment market is the moment of changing, current Spiral Jet Mill for Iron Ore Powder in the market It is of certain needs, but the society is constantly evolving, no matter what industry needs to keep pace with the times, they can lead the industry.
