Steam Jet Mill for MAGNESIUM SULFATE can be used for important or need to be grounded to particulate product processing, AlPA ultrafine pulverizer products are good, affordable, factory direct sales, also to promote after-sales service service for customers, good service attitude
Steam Jet Mill for Magnesium Sulfate is suitable for microfinishing machines of materials such as synthetic resins and chemical chemistry. It is different from the ordinary pulverizer. It is not only simply crushed such as impact force and cutting force, but also subject to a large amount of ultrasonic eddy current produced on the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken, viscous and elasticity under certain conditions. The raw material temperature of the machine increased, and the thermal material can be broken.
Characteristics of Steam Jet Mill for Magnesium Sulfate 1. Suitable for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.
The equipment market is rapidly changing. At present, the airflow classifier has certain needs in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.
