Fluidized Bed Jet Mill of Dried Fruit

Fluidized Bed Jet Mill of Dried Fruit is good, only need to be produced in a smooth ground place, and low noise, can avoid dust leakage during the pulverization process, favored by the powder industry.

Fluidized Bed Jet Mill of Dried Fruit is a classified device that is widely used in the current phase application range, which has a very good fineness in production, which can be finely pulverized silicon carbide. , Metal, ore and other substances, while also the production of ceramics, pharmaceuticals, biochemical products with high purity requirements.

Fluidized Bed Jet Mill of Dried Fruit Working Gas Transfer Machine and Cyclone Separator, dust collector and air - forming blowers have become a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed Ravier nozzle. At the intersection of multiple high pressure airflow, the material is repeatedly collided, friction, shear and broken. Under force, the thickness, fine product is separated, and fine particles that meet the particle size requirements are collected by a cyclone and dust collector by a grading wheel, and the crude particles reduce to the crushing area continue to break.

Fluidized Bed Jet Mill of Dried Fruit Job Safety Application Basic Requirements

1 The secure line is not allowed to use iron and sticks instead of hand feed.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. Stopping immediately when blocking phenomenon, it is strictly forbidden to use wooden sticks or hands to feed or pull out feed to avoid pulverizing the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.

ALPA sodium bicarbonate Fluidized Bed Jet Mill of Dried Fruit Case Sharing: The company often uses Fluidized Bed Jet Mill of Dried Fruit, when the power plant dry desulfurization, the sodium hydrogen carbonate is super fine powder. . The company has won many power plant dry desulfurization projects with our AlPa's cooperation. It is very satisfied with the Fluidized Bed Jet Mill of Dried Fruit, which we produce.

Technical parameters:
Finished granularity: 700 目
Production capacity: 800kg

Welcome everyone to choose our Shandong Alpa, company specializing in the production and development of airflow pulverizer product technology and Service, the company provides customers with secure and reliable product and services, which solves the worries of our customers.