Jet Mill of Pyrophyllite is a very common and common pulverizer. It has a wide range of applications involving many industries.
Jet Mill of Pyrophyllite is different from other crushers, which is smashed by collision between particles, airflow impact, shear, high-speed airflow, shock, friction and shear and other components grinder. It has the following main features:
1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
JET MILL OF PYROPHYLLITE Operation Performance: In the cyclone dust collector, the bag type dust collector is auxiliary, the host is set in the centrifugal grading device, which can be fine grind, and has a classification function, the wind is cut, no sieved or Grid, powder particles can be adjusted arbitrarily, broken materials, negative pressure delivery to exhaust valve ports, reach the product requirements, super fine classifier is widely used in different industries such as chemical, dyes, coatings, pharmaceuticals, foods.
How to correctly operate Jet Mill of Pyrophyllite?
Before the device is turned on, the connection site, sealing and line, etc. are detailed, and all the tests can be run after the problem can run the powder classifier.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
ALPA Ceramic Powder Jet Mill of Pyrophyllite Case Sharing: This customer is a mechanical equipment company, mainly engaged in drying, granulation, mixed equipment production and sales, company technologyStrong strength is a high-tech enterprise integrating technical intensive and integrated knowledge.
The customer lacks experience in powder grading, but many ultrafine powder is currently required to select ultrafine powder for ultrafine powder.The customer has chosen our ALPA as a partner after investigation.Provide a grading machine device for its customers' ceramic powder production lines. As a crusher manufacturing large enterprise, Shandong ALPA has been working to provide customers with greater value, the fineness, production capacity and installation site of each project is important information for custom selection, pre-sales service session.
AlPaThere are 24-hour online customer service to answer questions, provide an ideal grading machine production line solution, and provide the factory quotation to increase escort for ceramic powder grading projects.Welcome major ceramic powder manufacturers to inquire.
ALPA is a research and development of research and sales of ultra-fine classifiers, precision grading machines, laboratory grade machines, and is committed to classifying machines. Welcome friends in need to negotiate.
