In the classification operation of industrial production at this stage, the use of Fluidized Bed Jet Mill of Dye is mainly targeted by solid particles. It is also a combination of crushing equipment that is more common in the product ultrafine pulverization process. .
The overall development trend of China's material ultrafine crushing technology is to make a more ultra-fine pulverized equipment to various types of ultra-fine pulverization equipment towards low-cost, high efficiency, strong dispersibility, good dispersibility and stable quality. High technical requirements.
Fluidized Bed Jet Mill of Dye Engineering Technology will need more and more high-purity ultrafine powder, and ultrafine powder technology will play an increasingly important role in high-tech research and development. Although high-purity ultrafine powder is prepared by chemical synthesis, it is too high, which is extremely difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies. Its development also depends on the progress of the relevant technology. Therefore, the main development trend of ultrafine pulverization equipment has been developed with fine classified equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high handling capacity. Integrated development of equipment and process research. Ultrafine pulverization and supporting equipment must adapt to specific bored features and product indicators, and the scale model must be more adapted.
1. This micro-jet classifier is mainly designed for the research and development department of universities and research institutes and the enterprise;
2, its volume is very small and easy to move, in the crushing space is not very spacious, use This classifier is very convenient; of course, according to the actual situation.
3, the sample loss in the classifier is very small, and the grading of a small amount of valuable sample is very suitable.
1 Solder and other foreign matter. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4. Check if the solenoid valve is blown normallyForce, regulate the dust width of the dust collector and the spray interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.
ALPA Seaweed Feed Fluidized Bed Jet Mill of DYE Case Sharing: The company is a seafood, a seafood, and the breeding process is found to be pulverized, and it can be used as a feed for sea cucumber after pulverization. Save the cost of feed purchase. By comparing the long-term use of a Fluidized Bed Jet Mill of Dye, the purchase of feed may be purchased for a few years. The cost of the production line can save. The company purchased our AlPa's Fluidized Bed Jet Mill of Dye.
Technical parameters:
finished particle size: D90: 400 目
Production capacity: 400kg / h
In addition to Fluidized Bed Jet Mill of Dye, AlPa Technology Co., Ltd. also supplies for you Powder classification machine, super fine classifier, precision classifier, ultrafine gas flow grading machine, jet grading machine, etc. Welcome to buy!
