Spiral Jet Crusher Of Amoxicillin is well balanced, only needs to be produced in a smooth ground, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
The working process of Spiral Jet Crusher Of Amoxicillin is mainly after the material accelerates into supersonic flow through the nozzle, and the compressed air enters the flow of the pulverization region, and the material is fluidized, each particle has the same motion state. . In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.
Spiral Jet Crusher Of Amoxicillin has the following advantages: The ultrafine classifier is achieved by a pneumatic conveyor and a high-speed collision. Using wind energy to become powder, the traditional screening procedure is canceled. Each independent operation, complete function, compact structure, stable technical performance, high noise, high efficiency, beautiful appearance, flexible use, wide adaptation, non-powder, adjustable powder, easy to repair, And dry non-fibrous materials and minerals have an ideal effect.Ultraflight Spiral Jet Crusher of Amoxicillin's correct usage:
1, the ultrafine pulverizer and power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload. If you find vibration, Noise, bearing and body temperature is too high, outward spray, etc., should be closed immediately, and the failure will continue to work.
A silicon micron powder company has the main products with molten stone sand, molten silicon powder, soft composite silicon fine powder, high purity ultrafine silicon powder, activitySilicon fine powder, crystalline silicon powder, spherical silicon fine powder and other specifications.
Main uses: Photovoltaic solar industry and electronic package materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.
Case parameters:
Product particle size: Remove 20UM with fine powder
hour production: Sakuction efficiency 60-90%
