Because Jet Mill of Crystalline Sorbitol is widely used in all walks of life, the research and development of classifying machines at home and abroad pays great attention. In the current market, there is a great development space.
Airflow pulverized products except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape, high purity, high activity, good dispersibility, etc. Since Jet Mill of crystalline Sorbitol generates a Juromon's cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting point and thermal material. The gas ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
Jet Mill of crystalline Sorbitol's pulverization room is arranged in a particularly designed high-pressure intake nozzle, which is purified from the nozzle, forming an ultrasonic air flow. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.
The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.
Jet Mill of Crystalline Sorbitol's motor conservation measures
2, check if all fasteners of the pulverizer are fastened.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4, check if the protective device of the crusher is good, if the protective device is not normalThe like should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.
ALPA Cobalt Solitrate Jet Mill of Crystalline Sorbitol Case Sharing:
Case parameters:
Product particle size: D50: 15μm
Hour Yield: 600kg
Shan dong alpa is a variety of gas flow crushers, airflow mill, medical gas flow crusher, disc The development, manufacturing, and application of airflow pulverizer, users who need to purchase such products can contact us.
