Because Jet Mill of Steel Powder is widely used in all walks of life, the research and development of classifying machines at home and abroad pays great attention. In the current market, there is a great development space.
Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since Jet Mill of Steel Powder generates a Juromon cooling effect during the pulverization process, it is also suitable for low melting point and ultrafine pulverization of thermal materials. Jet Mill of Steel Powder pulverity is an important technical parameter and important indicator.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.
When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
Jet Mill of Steel Powder Features: The high-efficiency pulverizer has the advantages of simple structure, convenient disassembly, and the material crushing of the broken cavity; all indoors, stainless steel production, acidity, and high corrosion resistance Factory, and scalp can meet health requirements; stable operation, convenient movement, low noise universal crusher's crushing effect, low energy consumption. Compact shape, light weight, can be moved; high-efficiency fine breakboard has simple operation, no vibration, low noise, power saving, security, etc., especially for Chinese medicine clinics, hospital pharmacy, pharmacy, health products sales counter, Cutting, research institute, laboratory sample analysis and family food crushing; replacing traditional mortar, work efficiency can be increased by 50 times.
1 It is not allowed to use iron and sticks instead of hand feed.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane. At the same time, check if the leather belt looseness is appropriate.
4, before the pulverizer starts, first turn the rotor with hand, check the jug, hammer and rotor operationNo flexible and reliable, there is no collision in the shell, whether the direction of rotation of the rotor is consistent with the direction of the arrow, whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.
ALPA modified quartz, silicon fine powder Jet Mill of Steel Power Case Sharing:
A material company is a professional research and development, production of products such as inorganic non-metallic powder materials and surface treatment. , High-tech enterprises in one of sales and technology services.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, and Its surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Product particle size: D50: 3-45UM
Hours Yield: 3-10kg
To understand more product knowledge, you can continue to pay attention to our website. If you need to buy Jet Mill of Steel Powder, please feel free to contact us.
