Fluidized Bed Jet Mill of Flour is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
High-speed jet enters the crushing chamber, Through particle collision, multiple times in the friction of high pressure air, cut and pulverized, pulverized materials, and the intensive air flow movement, under the action of the fan, the rotation speed of Fluidized Bed Jet Mill of Flour The centrifugal force, so that the thickness of the material is separated from the separation, the fine particle size of the graded wheel into the cyclone separator and dust removal, and the crushing region of the crude particles continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater processing amount, energy saving, simple operation, and low maintenance cost.
Fluidized BED JET MILL OF FLOUR Main Performance Features:
1, the vertical hierarchical device is used, the product particle size is adjustable between D97: 8-150 microns, the particle shape is good, the particle size distribution is narrow . It can be used in series with multi-stage classifiers and produces a product having multiple particles.
2, the device is easy to disassemble, the inner wall is smooth, no dead angle. The entire system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the control system is controlled by program control and easy to operate.
Let's talk about how to correctly use Fluidized Bed Jet Mill of Flour
1. Prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, can you work properly? .
Second, open
1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
4, repair
1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tightSuitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note
1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
ALPA Slag Fluidized Bed Jet Mill of Flour Case Sharing: This customer is a steel slag reuse technology company, which is mainly engaged in steel slag sorting project.Through the experiment, our AlPA classifier reached customer needs.
Product particle size: D80: 23.4
Yield: 175kg / h 加 加
Shandong Alpa is a 20-year experience manufacturing company with Fluidized Bed Jet Mill of Flour devices, with a number of patents.Welcome to inquire!
