DISC JET MILL of Donkey-Hide

Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of China's DISC Jet Mill OFY-HIDE technology is stable to the focus, strong and high quality.

The overall development trend of China's material ultrafine crushing technology is to make a more ultra-fine pulverized equipment to various types of ultra-fine pulverization equipment towards low-cost, high efficiency, strong dispersibility, good dispersibility and stable quality. High technical requirements.
DISC Jet Mill OFKEY-HIDE engineering technology will need more and more high-purity ultrafine powder, ultra-fine powder technology will play an increasingly important role in high-tech research and development. Although high-purity ultrafine powder is prepared by chemical synthesis, it is too high, which is extremely difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies. Its development also depends on the progress of the relevant technology. Therefore, the main development trend of ultrafine pulverization equipment has been developed with fine classified equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high handling capacity. Integrated development of equipment and process research. Ultrafine pulverization and supporting equipment must adapt to specific bored features and product indicators, and the scale model must be more adapted.

The working principle of DISC JET MILL OFKEY-HIDE is: the compressed air is dried, and the pulverizing cavity is entered by the nozzle. In the pulverizing cavity, the material can be pulverized by a high pressure gas stream. Thereafter, the crude material can be separated from the centrifugal force generated by the grading turbine. Particles that meet the particle size requirements are in the cyclone separator and the dust collector, and the particles collected, and the particles that do not meet the requirements continue to be pulverized.

For the long-term \"health\" of the equipment, we need to take some steps to protect them again.

1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes; in the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.

Of course, in order to test the yield of a crusher, for some of the raw materials, for some screen holes, in order to determine the appropriate hammer sieve gap and suction, the useful life of the screen and the hammer can be obtained in a short time. Very high grinding efficiency data.However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.
2. DISC JET MILL OFKEY-HIDE mainly requires a reasonable use of reverse glitch: mainly to rush the side hair of the screen into the inside, greatly increase the friction, but this method is not used for a long time. After the globi polishing, the efficiency is lowered. It lasts for 30 minutes to 1 hour.
3. Put the friction piece into the DISC JET MILL OFKEY-HIDE: The friction plate has the effect of the material ring, but the effect is limited. First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.
For any of the equipment, daily maintenance can be performed in order to ensure that the equipment can operate for a long time, so daily is critical to the maintenance of DISC JET MILL OF Donkey-Hide.


ALPA Battery Disc Jet Mill of Donkey-Hide Case Sharing:

A new material company is a modern high-tech private enterprise integrating R \u0026 D, production and sales. The company teamed up with the research team of many universities to transform the international leading patented technology to high-tech products, filled the domestic technical gap. The company will rely on lithium-electric positive material materials as the core, with its company to form an interrelated, left and right support, collaborative support, comprehensive utilization cycle industrial chain.

Case parameters
Product particle size: 2-45um
Hour Yield: 200-300kg

ALPA Technology Co., Ltd. R \u0026 D, super fine classification machine, precision classifier, etc. The purity and accuracy of the graded product, if you need to purchase related equipment, please feel free to contact us. .