Jet Mill of Kapido is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is smudged, the granules are delicate, and the price is affordable.
Jet Mill of Kapido makes a complete set of crushing systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided, friction, shear and pulverized, and the crushing material is pulled down with the wind turbulence. Airflow movement to the hierarchical region, under a powerful centrifugal force generated by high speed rotation, so that the crude material is separated, and the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizer to continue pulverization. . Since Jet Mill of Kapido's crushing room is simple, it is easy to manufacture, so it is widely used.Jet Mill of Kapido can be used in series with a multi-stage classifier and produces a multi-particle size product. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly. The control system uses program control and easy to operate.
Any machinery device must pay attention to it before use, pay attention to use, operation, make the damage rate can be minimized, then what should you pay attention to before using Jet Mill of Kapido?
1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine. 2, lubrication should be performed as required to ensure the normal operation of the machine.
3, before adding the material to the pulverizer, it is not mixed to avoid damage to the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5. If there is any abnormality in use, it should be treated immediately to avoid more loss.
6, some parts should be checked regularly. If it is damaged, it should be replaced immediately.
AlPA Composite Powder Jet Mill of Kapido Case Sharing: The customer is a renewable resource company that requires the selection of different particle size sections of the composite powder, and it is necessary to select a super fine powder less than 30 μm. Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our AlPa, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T
Welcome major composite powder manufacturers to visit, incompetent experiments.
Jet Mill of Kapido produced by our company can not only separate from ordinary powder 20-2 μm is used fine fine powder, and can be used directly with mechanical pulverization equipment, forming a closed circuit, improving pulverity efficiency, and avoiding high temperatures in the cavity to cause adhesion, glue, causing operation, and the grading machine is also obtained.The majority of users have always been praised, and friends who need need are to contact us!
