Steam Jet Mill for Fiber Resin

Steam Jet Mill for Fiber Resin is one of the commonly used ultra-fine pulverization methods, widely used in ultrafine pulverization or fine pulverization of materials such as non-metallic mine, chemical, chemical, metallurgical and other industrial materials, with a fine particle size, narrow particle size distribution The surface of the particles is smooth, the particle rules, high purity, and high activity.

Steam Jet Mill for Fiber Resin has a wide range of smudges, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments. When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh. So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.

The working principle of Steam Jet Mill for Fiber Resin consists of a classifier, a cyclone separator, a dust collector, and a veneer. Under the pulverizing fan puller, the lower end of the gas pulverizer is moved upward to the hierarchical region, and the thickness and fine product are separated from the strong center of effort to the high-speed rotation grade turbine. The cyclonic separator or dust collector is collected by the grading wheel, and fine particles required to meet the particle size are collected, and the coarse particles are collected. The velocity of the entrained fine particles disappears and falls along the two towers of the cylinder wall. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles drops to the discharge port.

Any machine device must pay attention to it before use, you must pay attention to use, operation, make it damaged by minimize, then what should you pay attention to before using Steam Jet Mill for Fiber Resin?

1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.
3, before adding the material to the pulverizer, it is not mixed to avoid damage to the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5, if there is any abnormality in use, it should be handled immediately,Handle more losses.
6, some parts should be checked regularly.If it is damaged, it should be replaced immediately.

ALPA Xixia Powder Steam Jet Mill for Fiber RESIN Experiment: A mining company needs to be sorted by Xialuden powder. Through the experiment of our ALPA can do product particle size: D90: 16.8μm, Yield: 246kg/ h 加 加 量
Welcome to the majority of major manufacturers with Xixia stone graded demand to the factory, and collective experiments.

In addition to Steam Jet Mill for Fiber Resin, AlPa Technology Co., Ltd. also supplies powder grading machines, ultra-fine classifiers, precision classifiers, ultrafine airflow grading machines, jet grading machines, etc. Welcome to choosePurchase!