As is well known, Steam Jet Mill for Plastic Particles This product technology has received extensive attention from the industry.
Steam Jet Mill for Plastic Particles will rise during work, and when the temperature of the working fluid is too high, the flow rate of the gas increases. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
Steam Jet Mill for Plastic Particles Operation Performance: In the cyclone dust collector, the bag type dust collector is auxiliary, the host is set in the centrifugal grading device, which can be fine grind, and the classification function, the wind is cut, no Sieves or mesh, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to the exhaust valve port, reach the product requirements, super fine classifier is widely used in chemical, dyes, coatings, pharmaceuticals, food and other industries.
Steam Jet Mill for Plastic Particles The causes and solutions of the vibration can be carried out from the following aspects:
1. Insulating the hammer installation error in the assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.
ALPA Quartz Powder Steam Jet Mill for Plastic Particles Case Sharing:
A silicon material company's main business scope includes: quartz, 坩 waste processing, production; silicon fine powder, Fang Shiying, Molten stone, quartz sand, kaolin, flame retardant sales; self-operated and proxy products and technical import and export business
Case parameters:
Product particle size: D97: 5-75UM
Hour Yield: 20-100kg
The above is the relevant content of Steam Jet Mill for Plastic Particles, which is provided by Shan Dong ALPA.The company has consistently follows the management of the standard, puts the quality in the first production and service policy, providing customers with confidence and a weighing crusher product and services.
