Fluidized Bed Jet Mill of PVC is a clean, efficient, high-level, high-yield of advanced crusher model in crushing, is very extensive, from dozens of minor tests to test With a few hundred tons of large production, Fluidized Bed Jet Mill of PVC is narrow, the particle size distribution is narrow, the average particle size is fine; the powder is good, the product is purified; suitable for low melting points, thermal drugs; good sexy, less sealed, pollution Easy to operate; crushing - mixed - dry online operations have been widely recognized by the company.
The principle of the Fluidized Bed Jet Mill of PVC is to use high-speed airflow to cause the particles of the material itself to collide, and the airflow is used for the shear effect of the material impact, the impact of material and other components and shear. The material is caused to become more pulverized and the particle size distribution is narrower. Although in certain areas, Fluidized Bed Jet Mill of PVC has an irreplaceable advantage, but it also has a shortage of headache, which is relatively high. The principle has passed the precipitation of time and multiple applications, which is more mature, and has been widely used in mineral materials, chemical materials, pharmaceuticals and other industries.
What are the characteristics of Fluidized BED JET MILL OF PVC? Xiaobian is to analyze the features it has. 1. This micro-jet classifier is mainly designed for the research and development department of universities and research institutes and the enterprise;
2, its volume is very small and easy to move, in the crushing space is not very spacious, use This classifier is very convenient; of course, according to the actual situation.
3, the sample loss in the classifier is very small, and the grading of a small amount of valuable sample is very suitable.
1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you don't continue to use, remove the remaining from the machine.
8. Regular inspection tools and screens are damaged.If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.
ALPA carbonate Fluidized Bed Jet Mill of PVC case sharing: This customer is a company in production, sales of lithium carbonate, lithium hydroxide, potassium sulfate, and salt, etc., in which the lithium carbonate is sold,It is found that the current customer needs are ultrafine powder of lithium carbonate, so it upgraded the production line of lithium carbonate, purchased many of our ALPA's multiple Fluidized Bed Jet Mill of PVC.
Technical parameters:
Finished particle size: D50: 5-8μm
Production capacity: 450kg
Shandong AlPa is a source of Fluidized Bed Jet Mill of PVC, come from all year roundProvide equipment at home and abroad, welcome to inquire!
