Many manufacturers who want to make a crushing process will choose to buy an RTM Turbo Mill, but not all RTM Turbo Mill can apply production and processing, and the wrong processing method will make RTM Turbo Mill wear speeds.
RTM Turbo Mill is too fast, and the body cavity of the pulverizer should be used when the material hardness is too large. The equipment operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement loss. The products after the crushing products are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure. The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production. The effect of detection method.RTM Turbo Mill, the product particle size detection results are not required, and the product particle size detection result is still less requiring the result of the desired results after the problem of excluding the problem of pulverization. Whether the detection method is reasonable. For example, the material is highly viscous, and the material is easily tuned. If a dry detection method is obvious, it is obvious that it can be considered using a wet method, so that the substance is sufficiently dispersed in the solution and then detected, thus obtained. The result is the true test result. Effect of Cyclone Separation on Crushing Effect. The crushing material is approximately 200 to 300 mbar after the cyclone separated by the cyclone. This pressure can be packaged directly using a packaging bag at a whirlwind, which is the optimum state of the cyclone. If the pressure in the cyclone separator is too pressure, it will show that the air export of the pulverizer is large, which will have an effect on the crushing effect.
The above is Shandong Alpa Powder Technology Co., Ltd. to summarize the fasting of RTM Turbo Mill wear and solutions, you can compare the analysis, then determine the use method, needUsers who want to buy RTM Turbo Mill products should also call us.
