Xiaobian Talks to the correct use of Jet Mill, well known that Jet Mill has received extensive attention from the industry.
Jet Mill is mainly applicable to its wide application of its grinding mechanism. The product is high, typical materials are: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemical, low temperature requirements: medicine. NE, polyvinyl chloride.
By increasing the normal air of the gas source into nitrogen, carbon dioxide, etc. Jet Mill and cyclone separators, dust collectors and air machines have become a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed sluice nozzle. At the intersection of multiple high pressure airflow, the material repeatedly collides, friction, shear and crushing. Under strength, the thickness, fine product is separated, and the fine particles that meet the particle size requirements are collected by the cyclone and the dust collector by the grading wheel, and the crude particles reduce the crushing area to continue to break.
Jet Mill is widely used, everyone knows, so do you know how to use it correctly? There are some things I hope to help you.
1. Preparation before departure. Check whether the host, joint, pipeline, and the valve are normal, working properly.
2. Turn on the machine
(1) Open the compressor power, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, turn on the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, stop sequence: inverter - feeder - main air valve - compressor - grade impeller - motor cyclone material, dust removal switch - fan - Main power supply - air compressor.
4. Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high.
(2) Check the wear of the impeller, screw conveyor and the crushing nozzle. (3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is a period of time, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is running, the unloading port cannot be reached to avoid accidents.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regular inspectionAll valves to ensure safety.
Welcome to choose Shandong Alpa Powder Technology Co., Ltd., company specializing in the production and development and service of Jet Mill product technology, the company provides customers with secure and reliable Jet Mill products and services to solve the worries of customers.
