How to deal with Jet Mill FAQ

Xiaobian today and everyone talks about how to deal with Jet Mill, and there is a small series to introduce Jet Mill. Everyone knows that choosing a product or service, knowing from Jet Mill processing, service, quality, etc.

Since Jet Mill, the work efficiency of all walks of life has been continuously improved, and there is a pivotal position in pharmaceutical, chemical, food and other industries. Therefore, Jet Mill's failure needs to pay more attention. First, Jet Mill typically uses the direct connection of the motor and the crushing device, simple and easy to maintain. However, if both are unable to connect during the assembly process, it will cause the overall vibration of JET MILL. A. The rotor of the motor is different from the rotor of Jet Mill. The position of the motor can be moved on the left or right side of the motor, or can be moved on the pad at the bottom of the motor to adjust the concentricity of the two rotors. B, Jet Mill's rotor different hearts. The reason is that the two support surfaces supporting the rotor shaft are not in the same plane. Copper skin can be inserted at the bottom of the bearing housing, or increase the adjustable wedge iron in the bottom of the bearing to ensure concentric 2 axis head. C, Jet Mill vibration is large. The reason is that the coupling between the coupling and the rotor is uneven in the flat hammer in the center of the rotor or the rotor. The corresponding method coupled to the motor is employed according to different types of couplings. When the quality of the hammer is unequal, it is necessary to select each group of hammers to make the symmetry of less than 5g. The above is how to handle the content of Jet Mill, provided by Shandong AlPa Powder Technology Co., Ltd.. The company has consistently follow the management of the standard, put the quality in the first production and service policy, provide customers with confidence and Jet Mill of Jet Mill.