Xiaobian first introduces you the main content of RTM Turbo Mill, with the development of technology, RTM Turbo Mill has entered many people's lives, and even have a certain impact on everyone's life.
Maintenance and maintenance of ultrafine grinding beds should be paid.
1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find out the cause and troubleshoot.
2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, should be checked regularly, replace it in time, and ensure quality and production.
4, should check the wear of the blade and lining periodically. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing uses grease lubrication, 2-specific grease, degree of 265-95.
6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space (more Low tests) cannot be filled with excessive grease, otherwise the temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10. The lubricating oil used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of the second oil, then use it after 1000 hours.
Shandong Alpa Powder Technology Co., Ltd. supplies all kinds of RTM Turbo Mills. If you need to buy RTM Turbo Mill, you can follow the RTM Turbo Mill official website.
