Xiaobian sorted out the contents of Jet Mill purposes. As Jet Mill technology continues to develop, Jet Mill has gradually penetrated into daily life.
After the crushing, the particle size distribution is narrow, the particle surface is smooth, the particle shape is standardized, high purity, high activity, low melting point and thermal material and biological activity. Products can be available. Crush, because Jet Mill is powered by compressed air, compressed gas in the nozzle. Head expansion will reduce the temperature of the system. Mechanical impact pulverizer, vibrating mill, stirring mill and other crushing equipment are often longer, low production efficiency; the material is crushed, resulting in a large amount of heat, resulting in deterioration of thermal materials; equipment wear will pollute product. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radial direction of the pulverized chamber and is distributed at the same level.
The jet stream rotates with the material with a very high speed, forming a fluid power characteristic on the radius of the pulverizer. Material particles collide with each other with huge momentum and extruded with the inner wall of the crushing chamber. During the pulverization process, it has a high fine mill, the main suppression blades are wear resistant materials such as high strength, impact. Under the conditions of long-term high-speed rotation, it can remain stable, long life is long, and safe and reliable when user operation is safe. It is convenient and fast according to different maintenance. The direction of the plate frame medium and the filter pump adjusts the pressure of each filter machine, and under the premise of ensuring production, select reasonable pressure to protect the hydraulic element. The lubricating component needs to be lubricated when the filter is used. The operation and reliability of the automatic feedback device must be guaranteed, replacing in time without spiritual conditions.
Otherwise, the hydraulic element will be greatly damaged. Before the crusher is started, the rotor is first rotated by hand, check whether the gel, hammer, and rotor are flexible and reliable, there is no collision in the shell, whether the rotation direction of the rotor is consistent with the direction of the arrow, and whether it is. Dynamic and mill lubrication is good. Shandong Alpa Powder Technology Co., Ltd. is committed to Jet Mill, has a mature process, strong technical strength, professional engage in Jet Mill, survive in quality, welcome everyone to consult.
