Shandong Alpa Powder Technology Co., Ltd. is a science and technology private enterprise producing various Jet Mill, airflow mill, pharmaceutical Jet Mill, disc Jet Mill. .
The disc Jet Mill is a crushing device commonly used in industrial production. Due to its excellent performance, it is widely used in crushing operations of various materials. Although this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely. Now let's talk about the exclusion of common faults of air crushers. Disc Jet Mill Troubleshooting:
1, feed back: Improper tunnel adjustment, pipeline clogging, screen blocked, dust bag gas permeability or severe wear, hammer surface wear is severely caused by feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathable, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and the spindle, the balance the rotor and the adjustment belt are elastic, the bearing can return to normal state.
3, Jet Mill's strong vibration: Installing the hammer is wrong, the corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should immediately stop the damaged parts or remove the hard object.
5, low production efficiency: insufficient electric power, misconduct of pulley, slippery slip, hammer wear, and high raw material uneven or high water content is the main reason for the low production efficiency. We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
Today, the disc Jet Mill Xiaobian will introduce you to here. If you want to know more, please continue to pay attention to our website.
