Hello everyone! Welcome to watch the working principle of RTM Turbo Mill! I am RTM Turbo Mill. I am very happy to share our RTM Turbo Mill today.
The working principle of RTM Turbo Mill is to use a high-speed rotating hammer impact material, crushing the decision surface, the obedient surface and the natural gap.
The material sent to the crusher is affected by the rotor, and the rotor rotates around the central axis at a speed of 25 to 40 m / s, and breaks the first time. The material is then obtained from the rotor, flying on the hard wall at high speed, quadruple. The following is a detailed description of the high-efficiency shredder. The application of RTM Turbo Mill during the impact process. Broken rotors, rotors and fixed plate materials are difficult to break, kidnapped and cut, broken products from the lower part.
When the broken product is required to have a particle size of 40 mm, it is enough to achieve the goal. If the desired particle size is less than 20 mm, the next step is to further improve the material by a hammer and a polishing plate, and the gap between them is much smaller than the gap between the impingement plate and the hammer.
To learn more about RTM Turbo Mill, you will go to Shandong AlPa Powder Technology Co., Ltd., the company has produced RTM Turbo Mill and RTM Turbo Mill products, quality multiplication, and is very trustworthy.
