Talk today how to deal with Jet Mill blocking, well known, Jet Mill product technology has been widely valued by the industry.
There are many small crushers, crushers, Chinese medicine crushers, universal crushers, etc. in our daily life, but sometimes there will be some troubles, sometimes clogging the opportunity How should we deal with it? In fact, when the crusher is broken, it is a common fault.
The main reason is surgery. Today we teach you some ways to solve the blockbus block.
1. The feed speed is too fast, the load is increased, causing blockage. In the feed process, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. In this case, the feed port should be reduced or turned off, and the feed mode should be changed, and the amount of feed is controlled by increasing the amount. The feeder has two types of manual and automatic, and the user should select the appropriate feeder according to the actual situation. Due to the high speed of the rolling mill, the load is large, the load fluctuates. Therefore, the current of the pulverizer is generally controlled around 85% of the rated current.
2, exhaust pipe clogging or blockage is too fast, will cause the grinder outlet to block the grinder; if the delivery equipment is improper, the ventilation is weakened or blocked. After finding the failure, you should first send it clearly export transportation equipment, do not replace, adjust the amount of feed, and run it normally.
3, broken hammer, aging, screen closed, broken, crushing material is too high, will cause pulverizing machine. Regularly update the damaged hammer, keep the grinding machine, and check the screen. The water content of the crushing material should be less than 14%, which can improve production efficiency, and make the pulverizer do not block, improve the reliability of the mill. These are methods for processing grinding machines.
Machine failure is very common. Most importantly, we need to know how to solve the problem, which is a longer factor for the usage time of the grinder. In addition, maintenance machines are also very important.
Welcome to choose Shandong Alpa Powder Technology Co., Ltd., company specializing in the production and development and service of Jet Mill product technology, the company provides customers with secure and reliable Jet Mill products and services to solve the worries of customers.
