Today, talk about how to solve the Jet Mill inner speed, well known that this product technology of Jet Mill has received extensive attention from the industry.
The grinding machine, for the current society is not surprising, as the product of modern science and technology, it makes a huge contribution to various industries, can say that industrial production has no airflow crushing Machine, the entire production chain may face huge dangers. Therefore, for the crusher, what is the problem of internal speed difference, affecting work efficiency? Next, we follow the small editor to study the solution.
1. The air pulverizer is appropriately adjusted between the gap between the hammer and the screen: the friction of the surface of the screen varies with the surface distance of the material and the screen surface, and the friction between the hammer and the screen is different, thereby improving the hammer. Harmache speeds of hitting and materials, improve efficiency. However, in the feed production process, different, different material sieves, hammer sieves require regular adjustment of gaps; in the grinding, just starting, working for a period of time, the ball mill, crusher crushing chamber will change;
The gap between grinding parts, hammer hammers, wear, hammer, and increased production screen changes will be reduced, and it is difficult to maintain. Of course, in order to need a crusher's yield test, on the material, under the screen, determine the appropriate hammer and the sieve distance, regardless of the useful life of the screen and the hammer, can achieve a very high pulverization in a short time. Efficiency, but high pulverization efficiency can be achieved in feed production. The technical content of technical content is two things in various specific measurement data and Mills itself, and people and labor have extensive experience, and high costs are required in operation. After the hammer wear, the gap between the hammer and the screen increases, the friction is reduced, and the crushing efficiency is lowered.
2, rationally use reverse jet screen sieve: scrape the burr to the inside, increase friction, but not long, the grievable efficiency is not high. The duration is about 30 minutes to 1 hour.
3, increase suction: in the crusher system, load the pressure, tighten the material connected to the inner surface of the screen, increase the friction of the screen surface material, increase the hammer speed hammer and material, but increase the inhalation will also increase the wear of hammer sieve And the efficiency will not continue. At the same time, the power consumption of suction has also increased. 4, placed in the shell ring grinder: the rubber is rubber, but the effect is limited, in the front teeth hammer, small frictional force, hammering problem; the second is crowded, the plate is crowded, the footboard area is too large screen will reduce the screenSmall the screen area and the output will be reduced.
Welcome to choose Shandong Alpa Powder Technology Co., Ltd., company specializing in the production and development and service of Jet Mill product technology, the company provides customers with secure and reliable Jet Mill products and services to solve the worries of customers.
