What should Jet Mill need to pay attention to a few points in daily maintenance?
Here is one of the SHANDON ALPA Powder Technology Co., Ltd., Shandong Jet Mill manufacturers!
1. During the production process, the bearing of Jet Mill is often checked, and when the temperature rise exceeds 50 ° C, it should be downtown, and the reason is to be discovered and troubleshoot.
2, Jet Mill is running, the drive belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3. If the loss case should be checked frequently, replace the quality and production volume in time.
4, blade, the bushing should often check the wear situation, if wear, the productivity decreases, and the particle size is replaced after the particle size is replaced.
5, the host and the grading flow bearing are lipid lubrication, using 2 special lipids, degrees 265-295.
6, Jet Mill Bearings have a change in the lime than 2000 hours, and the filling of the grease is 1/2 (episode) or 3/4 (lower test) of the bearing cavity, or 3/4 (lower test) is not too much to fill the grease. The bearing temperature is too high.
7, the spiral feeder has changed the lipid period of 4,000 hours, and the calcium-based grease is added.
The above is required to pay attention to the related content of Jet Mill in daily maintenance, and the Shandong Alpa Powder Technology Co., Ltd., which is one of Shandong Jet Mill manufacturers!
