Today, Jet Mill manufacturers, Shandong AlPa Powder Technology Co., Ltd., come and tell you to fluidize the work of Jet Mill. The pulverized chamber of the Fluidized Bed Jet Mill is arranged with a particularly designed high-pressure intake nozzle, which is purified and dried from the nozzle, forming an ultrasonic gas stream.
Materials collided at high-speed airflow intersection centers, and it was pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the whirlwind separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.
The turbine grading system set in the classification room can obtain several microns or even finer powder. When the pulverized material is pulverized in the pulverization chamber, the same particles at the edge of the turbine will be subjected to two different power of the centrifugal force field (i.e., centrifugal inertia and airflow resistance generated by turbine). When the particles are large, the centrifugal force is larger than the resistance, and the large particles fly toward the chamber pool wall in the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized.
When the particles are small, at this time, at this time is less than the resistance, the small particles enter the turbine inside with the rising air flow, and collectively collected as a qualified product via the cyclone separator.
The above information about the working principle of the Fluidized Bed Jet Mill is provided by one of the Jet Mill manufacturers of Shandong AlPa Powder Technology Co., Ltd.!
