Today, I talk about the installation of pulverizer machinery, below Shandong AlPa Powder Machinery Co., Ltd. introduces the installation of the machine machinery.
The installation and operation of the pulverizer machine, has been introduced in the previous article. However, the content of this knowledge is not enough. We also need to understand more, so we can continue to deeply and extensively, so that you can fully understand the pulverizer machinery so that you will become more professional in this area. The following content will be mainly concentrated in its general provisions and the two aspects of the test, as follows.
1. General provisions
(1) Crusher mechanical drivers should be trained and assessment, knowing and familiar with "three understandings" and "four sessions", and also to hold certificates.
(2) It is necessary to cooperate with the conveyor driver, unified signal connection, and stop according to the order.
(3) When the pulverizer is charged, there should be a large block of material to avoid clogging or damage the machine.
2. Before the test
(1) mechanical should be installed on the basis of horizontal concrete, and secure it with a foot bolt.
(2) Before installing the pulverizer, pay attention to the body and the level should be vertical.
(3) After the mounting of the pulverizer is installed, the test can be taken after checking everything.
3. Try
(1) After verifying everything, it is possible to issue a boot signal.
(2) Crusher Machine In the process of test, pay attention to whether the mechanical operation is normal, whether the bearing temperature exceeds the specified temperature, and whether the temperature of the motor is normal.
(3) The safety device such as the protection network of the pulverizer machine should remain intact.
And often check frequently during the work, if it is damaged, it should be replaced immediately.
Welcome to Shandong ALPA Powder Machinery Co., Ltd., the above-mentioned mounting of the pulverizer is organized by Shandong AlPa Powder Machinery Co., Ltd., one of the crusher machinery suppliers.