Currently, environmental protection is no longer a problem that the airflow crusher is facing. After the fluidized bed pulverizer compresses, after filtration, after drying, the fluidized ultrasonic air flow is introduced through the nozzle, so that the material is fluidized, and the accelerated material is integrated in several nozzles. The collision, friction, and cut the microcarriers of the particles. After the pulverized material is conveyed into the impeller grading area, under the action of the graded wheel effort and fan effort, the coarse powder is separated, and the coarse powder returns to the crushing chamber according to its own gravity, and the qualified fine powder is Airflow enters the cyclone, fine dust is collected by the bag dust collector, and the purified gas is discharged from the air.
Jet Mill forms a set of crushing systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided with the intersection of the multi-high pressure airflow. The crushing material is pulverized after the fan pulling force Airflow movement to the grading area, under the power of high-speed rotation, the thick centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizing region to continue pulverization. . All systems that do not have a good job collection work basically reach "zero emissions", and the site does not have to sweep, just to mop. Therefore, the main problem facing Jet Mill is energy saving and efficient.JET MILL has high production cost, high energy consumption, high processing cost, and poor single-machine processing capacity (yield less than 2T / h), should not be produced in large quantities. The particle size of the product is difficult to reach the submicron grade, and the output is largely decreased below 10 μm, and the cost of processing has increased dramatically. In recent years, on the basis of Jet Mill, my country's Jet Mill has improved. In order to achieve better results, its internal structure is constantly updating and maintenance. Improve its performance and efficiency, improve the particle size of the powder and the issues raised by customers can be met.
In order to meet more customers' needs, Jet Mill has improved and optimized the ultrafine airflow pulverization equipment from the following aspects. Domestic Chinese medicine crusher producers should develop multi-function, efficient and low pulverizer equipment through continuous research and research, which is the development trend of traditional Chinese medicine crushers.
